Impinj RFID Readers
Firmware Version
Check the current firmware version installed on the RFID reader.
Antenna Count
View the number of antennas currently connected to the reader.
Antenna Hub Status
Monitor the status of the connected antenna hub.
Interface
Check which interface (e.g., Ethernet, Serial) is being used for communication.
System Time
View the current system time set on the RFID device.
Device Uptime
Check how long the RFID reader has been up and running.
Allocated Power (mW)
Track the power allocated to each antenna in milliwatts.
Reader Connected
Verify if the reader is connected and active on the network.
Reader Singulating
See if the reader is actively identifying individual tags in the field.
Temperature (°C)
Monitor the operating temperature of the RFID reader.
GPI Count
View the total number of General Purpose Input (GPI) lines available.
GPO Count
Check the number of General Purpose Output (GPO) lines available.
FastID Available
See if FastID support is enabled on the reader for faster tag processing.
Filtering Available
Confirm if on-reader tag filtering features are supported and active.
GPI Debounce Available
Check whether debounce logic is enabled for GPI lines to avoid false signals.
Hopping Region
View the regional configuration for frequency hopping (e.g., FCC, ETSI).
Impinj RSSI Reporting Available
Determine if RSSI (signal strength) data is being reported for tags.
Link Monitor Available
Track connectivity health and status through link monitoring tools.
Multiword Block Write Available
Check support for writing multiple memory words in one operation.
Phase Angle Reporting Available
Access advanced tag tracking data with phase angle reporting.
Tag Access Available
Verify if tag memory access operations (read/write) are enabled.
One Dashboard. Total Control.
Simplify how you manage Impinj RFID readers-remotely, securely, and at a scale